Build A Wooden Gear Clock--A Project For A Craftsman

In the early 1800s a number of American clock makers were producing shelf or mantel clocks in which the movement was made from wood. Gear wheels were shaped from hardwood such as cherry and carefully fitted to run smoothly. Some of these clocks have survived for 200 years or so and are today valuable antiques which sell for thousands of dollars when they come on the market. The average collector can't afford to buy them of course but there are modern reproductions available, mostly in the form of kits and plans.

Even earlier in the 1700s, tall case grandfather clocks with wooden works were being made by many clockmakers.The tall case left room for the weights which drive the clock to fall further so that the clock would run longer before needing to have the weights raised to the top again.

Building a wooden works clock is not really difficult but it takes time and careful workmanship to produce a fine working clock. The average home crafter with some wood working skills can do it with simple hand tools just as the early clock makers did. The result can be a fine family heirloom which will pass from generation to generation.

The Museum of Science and Industry in Chicago has on display a rare and beautiful wooden gear shelf clock which was made in the early 1800s. This fine clock is still in running order after 200 years. It has been carefully measured and detailed drawings made. These plans with complete building instructions are available for purchase. They show complete details of all the working parts and how they fit together. Detailed drawings of the clock case are also shown including every part of the original antique clock.

Building wooden gear clocks is a great hobby for the craftsman, and anyone can be a craftsman; it only takes careful work.This is not the type of project which can be completed in a few evenings. Rather it is a project for the person who takes great pride in the quality of their work and will spend whatever time is necessary to do a perfect job.The individual parts of such a clock are of very simple design and quite easy to make. To run smoothly each part must be finished properly so that the clock will keep good time.

To summarise, building a wooden gear clock is perfectly within the ability of almost anyone. It is hard to tell a well made copy of an antique clock from a genuine antique at a quick look. Close inspection by an expert will, of course, show the new wood and materials used to build it establishing its origin beyond doubt. All those who see the clock will admire it as a thing of beauty.It will tick tock away the hours and keep good time for a lifetime and likely for many decades after that.

Article Source: http://www.articlegoldmine.com

Want to know how you can build a wooden works clock?.It's easier than you think.For more info and resources go to www.woodenworksclock.com

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated